Wood Deck Stair Calculator
Measure from the deck surface down to the ground. The calculator splits that into equal steps, works out the stringers and tread boards, and draws the stairs from the side.
Stair profile
Stair summary
What is Wood Deck Stair Calculator?
Wood Deck Stair Calculator is a free online tool that splits the rise from your deck to the ground into equal steps and lists the stringers and treads.
Carpenters and DIY homeowners use the wood deck stair calculator to lay out deck stairs that meet the International Residential Code (IRC). The tool finds the riser height, tread count, total run, stringer length and tread boards, and draws the stair from the side.
- Deck builders
- Contractors
- Carpenters
- DIY homeowners
How Wood Deck Stair Calculator Works?
Wood Deck Stair Calculator works in 4 steps: it counts the risers, finds the run, sizes the stringers and counts the tread boards.
- 1Count the risers
- 2Find the run
- 3Size the stringers
- 4Count the tread boards
- Count the risers. Total rise ÷ max riser, rounded up, gives the risers. A 36" (914 mm) rise with a 7 1/2" max takes 5 risers of 7 3/16" (183 mm).
- Find the run. There is one fewer tread than risers. 4 treads × 11 1/4" (286 mm) give a total run of 3 ft 9 in (1.14 m).
- Size the stringers. Stringer length comes from the rise and run: 5 ft 6 3/4 in (1.70 m), cut from an 8 ft 2x12. A 48" (1.22 m) stair at 16" spacing takes 4 stringers.
- Count the tread boards. Each 11 1/4" tread takes 2 boards of 5 1/2" with a gap. 4 treads × 2 boards = 8 pieces, cut from 2 boards of 16 ft.
What Wood Deck Stair Calculator Uses?
Wood Deck Stair Calculator uses 5 inputs, 4 formulas and IRC stair limits to return 6 results.
1Inputs 5
- Total rise from deck to ground, in inches
- Max riser height: 7", 7 1/2" or 7 3/4"
- Tread depth: 10"–11 1/4"
- Stair width, in inches
- Stringer spacing: 12", 16" or 18"
2Formulas 4
Risers = total rise ÷ max riser, rounded upRun = (risers − 1) × tread depthStringer = √(rise² + (run + tread)²)Comfort check: 2 × riser + tread = 24"–25"
3Results 5
- Risers and riser height
- Treads and total run
- Stringer count and length
- Stair angle
- Tread boards
| Item | IRC limit |
|---|---|
| Riser height | 7 3/4" (197 mm) max |
| Tread depth | 10" (254 mm) min |
| Stair width | 36" (914 mm) min |
| Riser difference in one flight | 3/8" (9.5 mm) max |
| Handrail | Required with 4 or more risers |
Wood Deck Stair Calculator FAQ
How many steps do I need for a 36 inch high deck?
A 36" (914 mm) high deck needs 5 risers of 7 3/16" (183 mm) and 4 treads. The stair runs 3 ft 9 in (1.14 m) with 11 1/4" treads. With a 7 3/4" max riser, the same rise takes 5 risers.
What is the maximum riser height for deck stairs?
The maximum riser height for deck stairs is 7 3/4" (197 mm) under the IRC. Treads must be at least 10" (254 mm) deep, and risers in one flight can differ by no more than 3/8" (9.5 mm).
How many stringers do I need for 4 foot wide deck stairs?
A 4 ft (1.22 m) wide deck stair needs 4 stringers at 16" (406 mm) on center. Use stringers at 12" on center for composite treads. A 36" stair at 16" takes 4 stringers as well.
Do deck stairs need a handrail?
Yes, deck stairs need a handrail when the stair has 4 or more risers. The IRC sets handrail height at 34"–38" (864–965 mm) above the tread nosing. Count the handrail and guard in the Wood Deck Railing Calculator.
More deck calculators
Boards and decking
- Deck Board Spacing CalculatorThe gap to leave so the last board fits.
- Deck Board Cost CalculatorDecking, fasteners and tax, by material.
- Deck Board Layout CalculatorButt joint patterns checked row by row.
- Angled Deck Board CalculatorBoards and cuts for diagonal decking.
- Deck Board Feet CalculatorBoard feet, linear feet and lumber price.
- Deck Board Screw CalculatorScrews per board, per joist and per box.
- Deck Board Replacement CalculatorBoards for a partial or full resurface.
Framing and structure