Deck Board Calculator

About Deck Board Calculator

One page that tells you how many deck boards to buy, how to cut them and what they'll cost.

Why we built it

Most deck calculators take the deck area, divide it by the area of one board and add 10%. That number is often wrong. It ignores the last row you have to rip down. It ignores joints that have to land on a joist. And it throws away every offcut.

So you drive back to the lumber yard for three more boards. Or you stack a dozen spares in the garage that you paid for and never used.

Deck Board Calculator lays the deck out row by row, the way you would with a tape measure and a pencil. Then it shows you the drawing, so you can check its work before you spend money.

What each part does for you

  • Deck size. Type the length and depth, drag the sliders, or tap a common size like 12 × 16'. Every number on the page changes as you type.
  • Board choices. Pick the material, face width and stock length your supplier sells. Flip the boards to run parallel to the house or away from it, and watch the count change.
  • Boards to buy. The big number is what goes on your order. Under it you see how many boards the layout uses and how many are spares for waste and bad boards.
  • Live layout. A top-down drawing of every board on your deck. Joints sit on joists and the ripped last row is hatched. Turn on Framing to see the joists. Hover a board to see which stock board it's cut from.
  • Cut plan. Each bar is one stock board and the pieces you cut from it. Boards cut the same way are grouped, so you can set your saw stop once and cut a whole batch.
  • Shopping list and cut list. Boards, screws or clips, joists and cost in one list. Press Copy and paste it into a text to your supplier or a note on your phone.
  • Fasteners and cost. Screws are counted two per joist crossing and hidden clips one per crossing, plus 5% spare. Type your local price per foot or metre to get the total, the cost per board and the cost per square foot.
  • Units and languages. Work in feet and inches or metres and millimetres. The calculator works in 18 languages.

Who it's for

Homeowners planning a first deck. Contractors who want a fast count before they write a quote. Lumber yard staff checking a customer's order. And anyone replacing worn boards on a sound frame: enter the frame size and joist spacing, and you get a count for new decking only.

How the numbers are worked out

  • Rows: deck depth divided by the board's face width plus the gap.
  • Joints: pieces are trimmed so every butt joint lands on a joist, staggered in the pattern you pick.
  • Stock boards: pieces are packed longest first, with 1/8" (3 mm) lost per saw cut, so offcuts get used before a new board.
  • Fasteners: two face screws or one hidden clip at each joist crossing, plus 5%.
  • Cost: boards to buy × stock length × your price.

The method follows normal deck-building practice and the installation guides decking makers publish. Products and building codes differ from place to place, so treat the results as a good estimate. Check your board maker's guide and your local code before you build.

Who runs it

Deck Board Calculator is an independent project, built and kept up by one web developer. No lumber yard, decking brand or store pays us to recommend anything. There are no ads.

Your data

The calculator runs in your browser. What you type stays on your device. Theprivacy policy has the details.

Get in touch

Found a number that looks wrong, or a board size we should add? Tell us on thecontact page or email hello@deckboardcalculator.com. Ready to start? Open the deck board calculator.