Live layout
Cut plan
Each bar is one stock board. Offcuts are reused where they fit.
Shopping list
Pieces to cut and materials to order.
Cut list
How Deck Board Calculator Works?
Deck Board Calculator works in 5 steps: it reads your deck size, counts the rows, splits each row into board pieces, packs the pieces onto stock boards and adds a waste factor. The live layout plan, cut plan and shopping list update with every change you make.
- 1Deck sizeLength and depth in ft or m
- 2RowsDepth ÷ (board width + gap)
- 3Joints on joistsLong rows split at a joist
- 4PackingOffcuts used before new boards
- 5Order listBoards, screws, cost, waste
- Deck size. You enter the length along the house and the depth out from the house, in feet and inches or metres and millimetres (mm). Presets cover common sizes such as 12 × 16 ft (3.66 × 4.88 m).
- Rows. The calculator divides the deck depth by the board width plus the gap. A 5 1/2" (140 mm) board with a 3/16" (5 mm) gap covers 5 11/16" (144 mm) per row. A last row narrower than a full board is ripped to width.
- Butt joints. Rows longer than one stock board are split into pieces that end on a joist, at 12", 16" or 24" (305, 406 or 610 mm) joist spacing. Joints follow a staggered-thirds, brick-halves or aligned deck board pattern.
- Packing. Pieces are packed onto stock boards longest first, with 1/8" (3 mm) lost per saw cut. Offcuts fill short pieces before a new board is opened.
- Order list. A waste factor of 0–20% goes on top. The result is a deck board count, linear footage, a cut list, a screw or hidden-clip count and a deck cost estimate.
The deck board calculator is free, runs online in your browser and works for wood decking and composite decking. Nothing is installed and nothing you type is sent to a server.
How to Calculate Deck Boards
To calculate deck boards, divide the deck depth by the board width plus the gap to get the rows, multiply the rows by the boards per row, then add 10% for waste.
Rows = (deck depth + gap) ÷ (board width + gap), rounded up
Boards per row = deck length ÷ board length, rounded up
Boards to buy = rows × boards per row × 1.10
- Convert the depth to inches. 12 ft × 12 = 144" (3,658 mm).
- Add the gap to the board width. 5 1/2" + 3/16" = 5 11/16" (144 mm) per row.
- Divide and round up. (144 + 3/16) ÷ 5 11/16 = 25.35, so 26 rows. The last row is ripped to 1 13/16" (46 mm).
- Count boards per row. A 16 ft (4.88 m) run on 16 ft boards takes 1 board per row.
- Multiply. 26 rows × 1 board = 26 boards.
- Add 10% waste. 26 × 1.10 = 28.6, so 29 boards of 16 ft. That is 464 linear feet (141.4 m) for 192 ft² (17.8 m²) of deck.
| Method | Math | Boards before waste |
|---|---|---|
| Row method | 26 rows × 1 board per row | 26 |
| Area method | 192 ft² ÷ (16 ft × 0.474 ft coverage) = 25.3 | 26 |
The area method gives a close count on small square decks. The row method is exact on long runs, ripped last rows and butt joints, so the deck board calculator uses the row method.
How Many Decking Boards Do I Need Calculator
A 12 × 16 ft deck needs 29 decking boards of 16 ft, a 10 × 10 ft deck needs 25 boards of 12 ft, and a 20 × 20 ft deck needs 64 boards of 16 ft, with 5 1/2" (140 mm) boards, a 3/16" (5 mm) gap, 16" (406 mm) joists and 10% waste.
16 ft boards needed, by deck size (boards run along the first number)
| Deck size | Area | Rows | 12 ft boards | 16 ft boards | Linear ft (16 ft) |
|---|---|---|---|---|---|
| 10 × 10 ft3.05 × 3.05 m | 100 ft²9.3 m² | 22 | 25 | 25 | 400 ft122 m |
| 12 × 10 ft3.66 × 3.05 m | 120 ft²11.1 m² | 22 | 25 | 25 | 400 ft122 m |
| 12 × 12 ft3.66 × 3.66 m | 144 ft²13.4 m² | 26 | 29 | 29 | 464 ft141 m |
| 16 × 12 ft4.88 × 3.66 m | 192 ft²17.8 m² | 26 | 39 | 29 | 464 ft141 m |
| 16 × 14 ft4.88 × 4.27 m | 224 ft²20.8 m² | 30 | 44 | 33 | 528 ft161 m |
| 20 × 12 ft6.10 × 3.66 m | 240 ft²22.3 m² | 26 | 49 | 39 | 624 ft190 m |
| 16 × 16 ft4.88 × 4.88 m | 256 ft²23.8 m² | 34 | 51 | 38 | 608 ft185 m |
| 20 × 16 ft6.10 × 4.88 m | 320 ft²29.7 m² | 34 | 63 | 51 | 816 ft249 m |
| 24 × 12 ft7.32 × 3.66 m | 288 ft²26.8 m² | 26 | 58 | 43 | 688 ft210 m |
| 20 × 20 ft6.10 × 6.10 m | 400 ft²37.2 m² | 43 | 80 | 64 | 1,024 ft312 m |
Board length changes the count. A 16 ft run on 12 ft boards needs 2 pieces per row with a butt joint on a joist, which raises the board count from 29 to 39 on a 12 × 16 ft deck. Pick the stock length closest to your deck length, or a length that divides into it.
Get an exact count for your deck in the deck board calculator at the top of this page. Enter your size, board width, gap, joist spacing and waste factor, and the board count updates as you type.
How Do I Measure a Deck?
You measure a deck with 3 numbers: the length along the house, the depth out from the house, and the height from the ground to the deck surface. Measure to the nearest 1/8" (3 mm) with a 25 ft (7.5 m) tape measure.
- Mark the corners. Drive a stake at each corner and run a string line between the stakes.
- Measure the length. Measure along the house wall, where the ledger board attaches.
- Measure the depth. Measure from the house wall to the outer edge of the deck.
- Check square with the 3-4-5 rule. Mark 3 ft (0.91 m) along the wall and 4 ft (1.22 m) out from the wall. The diagonal between the marks reads 5 ft (1.52 m) when the corner is square. Use 6-8-10 ft (1.83-2.44-3.05 m) on decks over 12 ft (3.66 m).
- Compare the diagonals. Measure both corner-to-corner diagonals. Equal diagonals mean the deck is square.
- Add the board overhang. Deck boards overhang the rim joist by 1"–1 1/2" (25–38 mm) on each open side.
- Measure the height. Measure from the ground to the deck surface at the lowest point. Height sets the post length, the number of stair risers and whether you need a railing: the International Residential Code (IRC) requires a guard over 30" (762 mm).
To measure an existing deck for new boards, measure the frame outside to outside, count the joists and measure the joist spacing center to center.
How to Calculate Decking for Complex Deck Shapes
To calculate decking for a complex deck shape, split the deck into rectangles and triangles, count the boards for each part, then add 15% waste for angled cuts or 20% for curves.
- Sketch the deck to scale. Draw the outline on graph paper at 1 square = 1 ft (0.3 m).
- Split the shape. Divide it into rectangles first, then triangles for angled corners.
- Count each part. Run each part through the deck board calculator with the same board width and gap. The L-shaped deck takes 26 boards for part A and 7 boards for part B, 33 boards in total.
- Add a shape-based waste factor. The L-shaped deck needs 33 × 1.15 = 38 boards.
- Add the borders. For a picture-frame border, divide the deck perimeter by the stock board length and round up.
| Deck shape | Waste factor |
|---|---|
| Rectangle, boards laid straight | 10% |
| L-shape or T-shape | 10–15% |
| Diagonal boards at 45° | 15% |
| Octagon or hexagon | 15–20% |
| Curved edges | 20–25% |
| Picture-frame border | add 5% |
A regular octagon deck with 8 ft (2.44 m) sides covers 4.83 × 8² = 309 ft² (28.7 m²). Calculate multi-level decks one level at a time, and count each stair landing as its own rectangle.
What are the Best Deck Board Materials for Your Deck
The 5 best deck board materials are pressure-treated (PT) pine, cedar, composite, polyvinyl chloride (PVC) and ipe. Pressure-treated pine costs the least, composite and PVC need the least upkeep, and ipe lasts the longest.
Price per linear foot and lifespan, by decking material
- Pressure-treated (PT) pine$1.50–$2.50/ft10–15 years
- Western red cedar$3.00–$4.00/ft15–20 years
- Composite (Trex, TimberTech)$3.50–$6.00/ft25–50 years
- Polyvinyl chloride (PVC)$4.50–$7.00/ft30–50 years
- Ipe hardwood$6.00–$9.00/ft40–75 years
Price, $0–$10 per linear ftLifespan, 0–80 years
| Material | Price per ft (per m) | Lifespan | Upkeep | Weight | Best for |
|---|---|---|---|---|---|
| Pressure-treated (PT) pine | $1.50–$2.50$4.92–$8.20/m | 10–15 yr | Seal every 1–2 years | 1.7 lb/ft (2.5 kg/m) | Lowest cost per square foot |
| Western red cedar | $3.00–$4.00$9.84–$13.12/m | 15–20 yr | Stain every 2–3 years | 0.9 lb/ft (1.3 kg/m) | Natural wood that resists rot and insects |
| Composite (Trex, TimberTech) | $3.50–$6.00$11.48–$19.69/m | 25–50 yr | Wash once or twice a year | 2.4 lb/ft (3.6 kg/m) | Low upkeep and hidden fasteners |
| Polyvinyl chloride (PVC) | $4.50–$7.00$14.76–$22.97/m | 30–50 yr | Wash once or twice a year | 2.0 lb/ft (3.0 kg/m) | Pool decks and wet sites |
| Ipe hardwood | $6.00–$9.00$19.69–$29.53/m | 40–75 yr | Oil yearly to keep the color | 2.6 lb/ft (3.9 kg/m) | The longest-lasting wood deck |
Pressure-treated lumber
Pressure-treated pine is southern yellow pine (SYP) treated with copper preservatives against rot and termites. It is the standard framing lumber for joists, beams and posts under every decking material, and the American Wood Council (AWC) bases its DCA 6 prescriptive deck guide on treated framing. Wet treated boards shrink as they dry, so lay them tight with no gap.
Cedar
Western red cedar weighs half as much as treated pine and resists rot without chemical treatment. Cedar is soft and dents under furniture, and it turns silver-gray in 1–2 years without stain.
Composite decking
Composite decking is wood fiber and plastic with a capped plastic shell. Trex and TimberTech sell composite boards with 25–50 year warranties, and both brands publish their own gap and joist spacing rules in their installation guides. Grooved composite boards take hidden fasteners, which leave no screw heads on the deck surface.
PVC decking
PVC decking has no wood fiber, so the boards do not absorb water. PVC suits pool decks, docks and other wet sites.
Ipe
Ipe is a dense South American hardwood that weighs about 69 lb per cubic foot (1,100 kg/m³). Ipe needs carbide saw blades and pre-drilled screw holes, and it lasts 40 years or more.
Home Depot and Lowe's sell pressure-treated, cedar and composite decking by the board, in 8–20 ft (2.4–6.1 m) lengths. Price your choice in the Deck Board Cost Calculator.
What Tools Are Required to Build a Deck?
Building a deck takes 20 tools in 5 groups: measuring and layout, cutting, fastening, digging and concrete, and safety. A circular saw, an impact driver and a tape measure handle most of the work.
Measuring and layout6
- Tape measure25 ft (7.5 m)
- Chalk linemarks straight board rows
- Speed squaremarks square cuts
- 4 ft (1.2 m) levelchecks beams and joists
- String line and stakessets the deck outline
- Framing squarelays out stair stringers
Cutting4
- Circular sawcuts boards and joists
- Miter sawcuts clean, square and angled ends
- Jigsawcuts notches and curves
- Reciprocating sawcuts out old boards
Fastening4
- Drill/driverdrills pilot holes
- Impact driverdrives deck screws and lag screws
- Deck board spacershold the 1/8"–3/16" gap
- Hammersets joist hangers and nails
Digging and concrete3
- Post-hole digger or augerdigs footings to frost depth
- Wheelbarrowmixes and moves concrete
- Shovelbackfills and levels
Safety3
- Safety glassesfor every cut
- Hearing protectionfor saws and drivers
- Work glovesfor treated lumber and concrete
Rent the bigger tools. A gas-powered auger digs a 12" (305 mm) footing hole 36" (914 mm) deep in a few minutes, and home centers rent augers by the day. Deck builders and contractors add a nail gun with a joist-hanger nailer, a table saw for ripping the last board and a laser level for long beams.
What are the Common Mistakes When Calculating Deck Materials
There are 8 common mistakes when calculating deck materials: using the nominal board width, forgetting the gap, skipping the waste factor, forgetting stairs and fascia, ignoring joist spacing for diagonal boards, leaving butt joints off the joists, using area-only math on long runs, and mixing units.
Boards short or over on a 12 × 16 ft deck, compared with the correct 29 boards
- Using the nominal board width-2 boards
- Forgetting the gap+1 boards
- Skipping the waste factor-3 boards
- Forgetting stairs, landings and fascia-2 boards
- 1Using the nominal board width
A "6 inch" board is 5 1/2" (140 mm) wide. Dividing by 6" undercounts the rows.
- 2Forgetting the gap
Each 3/16" (5 mm) gap adds up across the deck. Leaving it out changes the row count.
- 3Skipping the waste factor
Straight decks need 10% extra, and diagonal decks need 15% for splits, knots and miscuts.
- 4Forgetting stairs, landings and fascia
A 4-step stair 48" (1.22 m) wide takes 8 tread pieces, which is 2 more boards of 16 ft.
- 5Ignoring joist spacing for diagonal boards
Boards at 45° need joists at 12" (305 mm) on center (o.c.), which adds joists to the framing list.
- 6Leaving butt joints off the joists
Every board end needs a joist under it. Pieces trimmed to the joist change the cut list.
- 7Using area-only math on long runs
Area math ignores the ripped last row and the offcuts from runs longer than one board.
- 8Mixing feet, inches and metres
Convert every measurement to one unit before you divide. 1 ft = 12" = 304.8 mm.
The deck board calculator avoids all 8 mistakes: it uses the actual board width, includes the gap, adds the waste factor, keeps butt joints on joists and works in one unit system at a time. Count stairs separately in the Wood Deck Stair Calculator.
Frequently Asked Questions
How do you calculate deck boards?
You calculate deck boards by dividing the deck depth by the board width plus the gap, multiplying the rows by the boards per row, and adding 10% for waste. A 12 × 16 ft (3.66 × 4.88 m) deck with 5 1/2" (140 mm) boards and a 3/16" (5 mm) gap has 26 rows. With one 16 ft board per row, that is 26 boards, and 29 boards with 10% waste.
How do I calculate how much decking boards I need?
Calculate the decking boards you need by working out the rows from the deck depth, the boards per row from the deck length, then adding 10% for a straight layout or 15% for a diagonal layout. Multiply the board count by the board length for linear footage: 29 boards × 16 ft = 464 linear feet (141.4 m).
How many boards do I need for my deck calculator?
A deck board calculator needs 5 inputs to count your boards: deck length, deck depth, board width, board length and the gap between boards. Deck Board Calculator takes those 5 inputs plus joist spacing and a waste factor, then returns the board count, cut list, screw count and cost. A 10 × 10 ft (3.05 × 3.05 m) deck needs 25 boards of 12 ft, and a 20 × 16 ft (6.10 × 4.88 m) deck needs 51 boards of 16 ft.
How to calculate deck sheet quantity?
To calculate deck sheet quantity, divide the deck area by the area of one sheet and add 10% for waste. A 4 × 8 ft (1.22 × 2.44 m) sheet covers 32 ft² (2.97 m²), so a 192 ft² (17.8 m²) deck needs 192 ÷ 32 = 6 sheets, and 7 sheets with 10% waste. Plywood and oriented strand board (OSB) deck sheets go under a waterproof membrane on roof decks and covered decks. For corrugated metal deck sheets, divide the deck width by the coverage width of one sheet, not its full width.
More deck calculators
Boards and decking
- Deck Board Spacing CalculatorThe gap to leave so the last board fits.
- Deck Board Cost CalculatorDecking, fasteners and tax, by material.
- Deck Board Layout CalculatorButt joint patterns checked row by row.
- Angled Deck Board CalculatorBoards and cuts for diagonal decking.
- Deck Board Feet CalculatorBoard feet, linear feet and lumber price.
- Deck Board Screw CalculatorScrews per board, per joist and per box.
- Deck Board Replacement CalculatorBoards for a partial or full resurface.
Framing and structure